Turn-key PCB assembly services in prototype quantities or low-volume to mid-volume production runs

Virtual keyboard from acceleration sensing glove

SMD chips, there is more potential of using them on a virtual gloves. The glove we are talking about was designed in University of California, Berkeley by Professor Kris Pister students. This glove along with proper software is capable to translate hand gestures in to computer symbols. Glove has Analog Devices ADXL202 dual axis accelerometers stacked on each of fingers and one additional on back of the hand. SO whole hand movement can be recorded by Atmel AVR microcontroller which sends data to computer via serial port. It can send data via RF channel if needed (not implemented currently). Microcontroller sends raw data to PC where software has to interpret it in to rotations in order to define hand gesture. Here is a publication article about calculations that software does… Continue reading

Autopilot for autonomous aerial hobbyist vehicles

The idea of this project was to build DIY autopilot kit that anyone could build and use in their flying models like helicopters.   Autopilot uses two dual axis ADXL202 accelerometers to read 3D acceleration, also it reads attitude, engine stats, position, payload stats. All these readings and control is operated by realtime system OS, which reads each sensor at some predefined rate. This is really quite complex system which seems to be stil under development – but it already gives positive results. Project details are available on sourceforge project page. Continue reading