Turn-key PCB assembly services in prototype quantities or low-volume to mid-volume production runs

New BlueBoard-LPC1768-H has been released

Continuing with its endeavor to deliver low cost micro controller hardware development platform, NGX has now launched a new low cost prototyping platform for LPC1768 series of mircocontrollers. LPC1700 are ARM cortex-M3 based micro controllers. The platform is named BlueBoard-LPC1768-H and costs only $32.5

BlueBoard-LPC1768-H is a breakout board for LPC1768 cortex-M3 based microcontroller. The LPC1768 microcontroller has 512KB of internal flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface, 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C-bus interfaces, 2-input plus 2-output I2S-bus interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock (RTC) with separate battery supply, and up to 70 general purpose I/O pins

Board can be purchased from

Following are the salient features of the board.
* Dimensions: 94.08×54.48 mm2
* Two layer PCB (FR-4 material)
* Power: USB powered or can be powered through the DC jack, 5-7.5V input
* reset switch
* Test LED
* 32Khz crystal for RTC
* On board 258kb I2C EERPOM
* Extension headers for all microcontroller pins
* USB B-type connector for powering the board
* 20pin – JTAG connector

[..Source link..]

Bookmark the permalink.

Comments are closed.