Turn-key PCB assembly services in prototype quantities or low-volume to mid-volume production runs

DIY Your Own Weather Station!

Do you have the interest to become an amateur meteorologist? Or, do you think that it’s impossible for you to be a meteorologist, since you didn’t have the basic knowledge about meteorologist?

Believe it or not, you don’t need to have the acquire knowledge for eligible yourself as an amateur meteorologist! All you need to do here is to construct your weather station inside a weatherproof box.

weather-station

Have a closer look on the above weather station. This project is based on PIC18F452 that running at 4 MHz. It can displays auto-memory in all high and low values without any problem.

The reason why you should develop a weather station by your own, because it can be used to record:

  • Pressure reading,
  • Relative humidity,
  • Indoor and outdoor temperature display (Either in Celsius or Fahrenheit),
  • Mbar/hPa or mm Hg!

Beside that, it also included with calendar and clock, easy 3-button user-menu, 42 hour-history display and power saving sleep mode.

The best part about this weather station is it only turned on, when you’re really needed. Hence, you don’t need to waste many power consumption here!

[..Source link..]

Bookmark the permalink.

One Comment

  1. Hello! If you want an easier way to develop your projects here I found out about a contest that can make you the owner of an MPLAB PIC18 Starter Kit from Microchip!
    You can read about this at: http://www.microdiy.com/index.php?/contests/win-mplab-starter-kit-for-pic18-microcontrollers.html

    Good Luck!

Leave a Reply