Ambient light bulb

Mike has been astound by Mathmos aduki so he decided to build one by himself. Lamp is controlled via web interface based on Tuxgraphics project. From software part LED lamps are controlled by using 8 bit timers in PWM mode what allows to have intensity levels from 0 to 255. This is really nice project if you want to make your room more intimate and moody. Author gives very good description about how he was experimenting during development phase. All tools and programs are under the GNU Public Licence so everyone can replicate the project. Continue reading

Various code examples for NXP microcontrollers

IAR Systems community have collected several code examples for NXP LPC2000 microcontroller series. Code snippets allow to adapt to IAR Embedded Workbench for ARM much quicker. Most of code is written for various evaluation kits, but code also may be adapted to any ARM board.   Code collection include examples of IO, LCD, timers, USART, USB, External memory, Interrupts and more. All projects are packed in separate archives for convenient download and use. Continue reading

GSM alarm project with BasicX Stamp

Pedro Miguel have been developing pretty simple GSM alarm unit controlled by BasicX24 stamp module.   He connected Siemens C35 cell phone to to BX24 board and communicated by using AT commands via serial interface. In his test board used a PIR sensors for motion detection. When motion is detected system sends SMS to specified cell phone. Control code is written in basic. Author left project open for future development and expanding. Continue reading

Embedded 1 to 8 intercom system

This project was created by M.Shakeel Malik. System allows to make regular calls and to one of 8 internal phones.   System is controlled by Atmel AT89S51 microcontroller. System also have its own tone generator which allowing to send dial and busy tones. Calls can be hold with voice message or melody signal transmission. Circuit and source asm code is available. Continue reading

High power RGB LED controller

This is nice project from petesworld. Device is used to drive high power RGB led (250mA) by using PWM control. Controlling separate colors (Red, Green, Blue) there is possible to generate up to 16 million colours. Device is used mainly for dynamic and static color effects.   LED was placed in to diffused dome lamp. This way diffused light looks nice. Circuit diagram isn’t very complicated as there are ZXLD1350 current drive circuits used. Source code is available for non commercial use. Be sure to check for other project revisions. Continue reading

Handheld pocket health monitor

This health monitor may become a dream of many people while it is capable to monitor most of human bio-signals including ECG, EMG, GSR, Pulse Oximetry, Temperature, Breathing sounds and even movement with 3 axis accelerometer.   This health monitor is based on Texas Instruments MSP430 MCU which is characterizes as low power microcontroller. Data is sent via blue-tooth to Pocket PC where data is analysed and displayed as graphs. Also data is recorded to dataflash for backup. Continue reading